![](https://robotwala.co.in/wp-content/uploads/2023/07/tec1-12703-thermoelectric-3a-peltier-module-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/tec1-12703-thermoelectric-3a-peltier-module-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/TEC1-12703-TEC-Thermoelectric-Cooler-Bag-Peltier-1-462x462-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/TEC1-12703-TEC-Thermoelectric-Cooler-Bag-Peltier-1-462x462-400x400-1-150x150.jpg)
Thermoelectric coolers also are known as TEC or Peltier Module create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹320.00 Original price was: ₹320.00.₹299.00Current price is: ₹299.00.
Inclusive of GST
50 in stock
50 in stock
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
Thermoelectric coolers also are known as TEC or Peltier Module create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity.
This Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it.
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.
Also Known as Thermoelectric cooling modules, Thermoelectric modules, Peltier modules, Thermoelectric cooling module.
Important Note – Heat side requires heat sink all the time. Do not run this device with a power supply more than a few seconds without a heatsink mounted to the device!
Model | TEC1-12703 |
Operating Voltage(VDC) | 12 |
Maximum Voltage(V) | 15 |
Maximum Current(A) | 3 |
Maximum Power (W) | 30 |
Maximum Temperature(C) | 65 |
Wire Length(mm) | 150 |
Length (mm) | 30 |
Width (mm) | 30 |
Height (mm) | 3.6 |
Weight(gm) | 15 |
Package Includes:
1 x TEC1-12703 30x30mm Thermoelectric Cooler 3A Peltier Module
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
Operating Voltage(VDC) |
12 |
---|---|
Maximum Voltage(V) |
15 |
Maximum Current(A) |
3 |
Maximum Power (W) |
30 |
Maximum Temperature(C) |
65 |
Wire Length(mm) |
150 |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.