The PIC12F675 is a 8-Pin, Flash-Based 8-Bit CMOS Microcontrollers. This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip?s powerful PIC? MCU architecture into an 8-pin package and features 4 channels for the10-bit Analog-to-Digital (A/D) converter, 1 channel comparator and 128 bytes of EEPROM data memory. This device is easily adapted for automotive, industrial, appliances and consumer entry-level product applications that require field re-programmability.
Features:-
1. High-Performance RISC CPU:
? Only 35 Instructions to Learn – All single-cycle instructions except branches
? Operating Speed: – DC ? 20 MHz oscillator/clock input – DC ? 200 ns instruction cycle
? Interrupt Capability
? 8-Level Deep Hardware Stack
? Direct, Indirect, and Relative Addressing modes
2. Special Microcontroller Features:
? Internal and External Oscillator Options – Precision Internal 4 MHz oscillator factory calibrated to ?1% – External Oscillator support for crystals and resonators
? Power-Saving Sleep mode
? Wide Operating Voltage Range ? 2.0V to 5.5V
? Industrial and Extended Temperature Range
? Low-Power Power-on Reset (POR)
? Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
? Brown-out Detect (BOD)
? Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation
? Multiplexed MCLR/Input Pin
? Interrupt-on-Pin Change
? Individual Programmable Weak Pull-ups
? Programmable Code Protection
? High Endurance Flash/EEPROM Cell
– 100,000 write Flash endurance
– 1,000,000 write EEPROM endurance
– Flash/Data EEPROM Retention: > 40 years
3. Peripheral Features:
? 6 I/O Pins with Individual Direction Control
? High Current Sink/Source for Direct LED Drive
? Analog Comparator module with:
– One analog comparator
– Programmable on-chip comparator voltage reference (CVREF) module
– Programmable input multiplexing from device inputs
– Comparator output is externally accessible
? Analog-to-Digital Converter module (PIC12F675):
– 10-bit resolution
– Programmable 4-channel input
– Voltage reference input
? Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
? Enhanced Timer1:
– 16-bit timer/counter with prescaler
– External Gate Input mode
– Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
? In-Circuit Serial Programming TM (ICSPTM) via two pins
Specification:-
Parameters |
Values |
Program Memory Type |
Flash |
Program Memory Size (KB) |
1.75 |
CPU Speed (MIPS/DMIPS) |
5 |
SRAM (B) |
64 |
Data EEPROM/HEF (bytes) |
128 |
Timers |
1 x 8-bit, 1 x 16-bit |
Number of Comparators |
1 |
Temperature Range (?C) |
-40 to 85 |
Operating Voltage Range (V) |
2 to 5.5 |
Pin Count |
8 |
Related Document:-
PIC21F675 SMD Data Sheet
Reviews
Clear filtersThere are no reviews yet.