74HC4060 14-Stage Binary Ripple Counter IC (744060 IC) DIP-16 Package

The 74HC4060 is a high speed binary ripple carry counter. These counters are implemented utilizing advanced silicon-gate CMOS technology to achieve speed performance similar to LS-TTL logic while retaining the low power and high noise immunity of CMOS. The 74HC4060 is a 14-stage counter, which device increments on the falling edge (negative transition) of the input clock, and all their outputs are reset to a low level by applying a logical high on their reset input. The 74HC4060 also has two additional inputs to enable easy connection of either an RC or crystal oscillator. This device is pin equivalent to the CD4060. All inputs are protected from damage due to static discharge by protection diodes to VCC and ground. 

SKU: RW-02452

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

34.22

Inclusive of GST

0 People watching this product now!
  • Pick up from the Robotwala Store

To pick up today

Free

  • Shiprocket from Air

Our courier will deliver to the specified address

3-4 Days

139

  • Shiprocket from Surface

courier will deliver to the specified address

5-7 Days

90

  • Warranty 1 year
  • Free 30-Day returns

Payment Methods:

Description

The 74HC4060 is a high speed binary ripple carry counter. These counters are implemented utilizing advanced silicon-gate CMOS technology to achieve speed performance similar to LS-TTL logic while retaining the low power and high noise immunity of CMOS. The 74HC4060 is a 14-stage counter, which device increments on the falling edge (negative transition) of the input clock, and all their outputs are reset to a low level by applying a logical high on their reset input. The 74HC4060 also has two additional inputs to enable easy connection of either an RC or crystal oscillator. This device is pin equivalent to the CD4060. All inputs are protected from damage due to static discharge by protection diodes to VCC and ground. 

Features:- 

? Typical propagation delay: 16 ns 

? Wide operating voltage range: 2?6V 

? Low input current: 1 ?A maximum 

? Low quiescent current: 80 ?A maximum (74 Series) 

? Output drive capability: 10 LS-TTL loads 

Specifications:-

Parameter Specification
Supply Voltage (VCC ? 0.5 to + 7.0V 
Input Voltage (VIN)  ?1.5V to VCC + 1.5V
Output Voltage (VOUT)  ? 0.5 to VCC + 0.5V
Clamp Diode Current (IIK, IOK)    ? 20 mA
DC Output Current, per pin (IOUT) ? 25 mA
   DC VCC or GND Current, per pin (ICC) ? 50 mA 
 Storage Temperature Range (TSTG) ? 65?C to + 150?C 
Power Dissipation (PD) (Note 4)  600 mW
S.O. Package only   500 mW
Lead Temperature (TL) (Soldering 10 seconds)  260?C

Related Document:-

 74HC4060 IC Datasheet

Additional information

Operating voltage

2.5 3.0V

Pixel Resolution

0.3MP

Photosensitive array

640 x 480

Optical Size

1.6 inch

Angel of view

67 degrees

Maximum Frame Rate

30fps VGA

Sensitivity

1.3V/(Lux-sec)

Dormancy

Less than 20A

Power consumption

60mW/15fpsVGA YUV

Temperature operation Range

-30 C ~ 70 C

Pixel area

3.6 x 3.6 m

Signal to noise ratio (SNR)

46 dB

Dynamic range

52 dB

Specification

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “74HC4060 14-Stage Binary Ripple Counter IC (744060 IC) DIP-16 Package”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5