74HC4053 Triple 2-channel Multiplexer/Demultiplexer IC DIP-16 Package
The 74HC4053; 74HCT4053 is a high-speed Si-gate CMOS device and is pin compatible with the HEF4053B. It is specified in compliance with JEDEC standard no. 7A.The 74HC4053; 74HCT4053 is triple 2-channel analog multiplexer/demultiplexer with a common enable input (E). Each multiplexer/demultiplexer has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and three digital select inputs (Sn). With E LOW, one of the two switches is selected (low-impedance ON-state) by S1 to S3. With E HIGH, all switches are in the high-impedance OFF-state, independent of S1 to S3. VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4053 and 4.5 V to 5.5 V for 74HCT4053. The analog inputs/outputs (nY0 to nY1, and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC ? VEE may not exceed 10.0 V. For operation as digitalmultiplexer/demultiplexer, VEE is connected to GND (typically ground)
Features:-
Wide analog input voltage range from ?5 V to +5 V
Low ON resistance:
80 (typical) at VCC VEE = 4.5 V
70 (typical) at VCC VEE = 6.0 V
60 (typical) at VCC VEE = 9.0 V
Logic level translation: to enable 5 V logic to communicate with 5 V analog signals
Typical ?break before make? built-in
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
CDM JESD22-C101E exceeds 1000 V
Multiple package options
Parameter
Specification
Supply Voltage (VCC)
? 0.5 to + 11.0V
input clamping current
+20 mA
switch clamping current
+20mA
switch current
? 25 mA
supply current(ICC)
50mA
ground current(IGND)
-50 mA
Storage Temperature Range (TSTG)
? 65?C to + 150?C
Power Dissipation (PD) (Note 4)
750 mW
input transition rise and fall
rate
625 ns/V
ambient temperature
-40 to +25
Package Includes:-
1 x 74HC4053 Triple 2-channel Multiplexer/Demultiplexer IC DIP-16 Package
Reviews
Clear filtersThere are no reviews yet.