2 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse

This is a 2 Channel 12V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from Higher voltage DC control circuitry. They accomplish this by using infrared light as the contact, a solid-state relay is really just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over mechanical relays.

SKU: RW-01127

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

286.14

Inclusive of GST

0 People watching this product now!
  • Pick up from the Robotwala Store

To pick up today

Free

  • Shiprocket from Air

Our courier will deliver to the specified address

3-4 Days

139

  • Shiprocket from Surface

courier will deliver to the specified address

5-7 Days

90

  • Warranty 1 year
  • Free 30-Day returns

Payment Methods:

Description

This is a 2 Channel 12V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from Higher voltage DC control circuitry. They accomplish this by using infrared light as the contact, a solid-state relay is really just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over mechanical relays.

A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan compared to the traditional mechanic relay.

When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.

 
Input Parts :
  1. DC+: connected to VCC (Supply power according to relay voltage)
  2. DC-: connected to GND
  3. IN1: CH1 Signal triggering the end of 1-channel relay module (active at the Low level)
  4. IN2: CH2 Signal triggering the end of 2-channel relay module (active at the Low level)

Features:

  1. 2-channel 2 AMP Solid State Relay board.
  2. Control 8 loads of up to 2 amps each at 240 VAC.
  3. Good for lighting, Holiday displays, etc.
  4. Has been assembled, and the electrical test passed.
  5. Led indicator for each relay.
  6. Use it to control various appliances and other equipment with a large current.
  7. It can be controlled directly by a Microcontroller

Specifications:

  1. Part Number: G3MB-202P
  2. Power supply:3-24VDC/160mA
  3. Switching Voltage (VAC):240@2A
  4. Isolation: Phototriac
  5. Zero Cross: Yes
  6. Length (mm):105
  7. Width (mm):57
  8. Height (mm):24
  9. Weight (gm):88

Package Includes:

1 x 8 Channel 24V Relay Module Solid State High-Level SSR DC Control 250V 2A with Resistive Fuse

* Product Images are shown for illustrative purposes only and may differ from actual product.

Additional information

Operating voltage

2.5 3.0V

Pixel Resolution

0.3MP

Photosensitive array

640 x 480

Optical Size

1.6 inch

Angel of view

67 degrees

Maximum Frame Rate

30fps VGA

Sensitivity

1.3V/(Lux-sec)

Dormancy

Less than 20A

Power consumption

60mW/15fpsVGA YUV

Temperature operation Range

-30 C ~ 70 C

Pixel area

3.6 x 3.6 m

Signal to noise ratio (SNR)

46 dB

Dynamic range

52 dB

Specification

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “2 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5