Showing 409–420 of 700 results
CD4043 Quad NOR R-S Latch Tri-state IC DIP-16 Package
The CD4043 is quad cross-couple 3-STATE CMOS NOR latches These latch has a separate Q output and individual SET and RESET inputs. There is a common 3-STATE ENABLE input for all four latches. A logic ?1? on the ENABLE input connects the latch states to the Q outputs. A logic ?0? on the ENABLE input disconnects the latch states from the Q outputs resulting in an open circuit condition on the Q output. The 3-STATE feature allows common bussing of the outputs.
CD4046 Micropower Phase Locked Loop IC DIP-16 Package
CD4047 Astable/Monostable Multivibrator IC DIP-14 Package
CD4049 Hex Inverting Buffer/Converter IC DIP-16 Package
The CD4049 device are inverting hex buffers, and feature logic-level conversion using only one supply voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL or TTL converters and can drive directly two DTL or TTL loads. (VCC = 5 V, VOL ? 0.4 V, and IOL ? 3.3 mA.)
CD4050 Hex Non-Inverting Buffer IC DIP-16 Package
The CD4050 devices noninverting hex buffers, and feature logic-level conversion using only one supply voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL or TTL converters and can drive directly two DTL or TTL loads. (VCC = 5 V, VOL ? 0.4 V, and IOL ? 3.3 mA.)
CD4051 Single 8-channel Multiplexer/Demultiplexer IC DIP-16 Package
The CD4051 analog multiplexers and demuliplexers are digitally-controlled analog switches having low ON impedance and very low OFF leakage current. These multiplexer circuits dissipate extremely low quiescent power over the full VDD ? VSS and VDD ? VEE supply-voltage ranges, independent of the logic state of the control signals.
CD4052 Differential 4-channel Multiplexer/Demultiplexer IC DIP-16 Package
The CD4052 analog multiplexers/demultiplexers are digitally controlled analog switches having low ?ON? impedance and very low ?OFF? leakage currents. Control of analog signals up to 15Vp-p can be achieved by digital signal amplitudes of 3?15V. For example, if VDD = 5V, VSS = 0V and VEE = ?5V, analog signals from ?5V to +5V can be controlled by digital inputs of 0?5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD?VSS and VDD?VEE supply voltage ranges, independent of the logic state of the control signals. When a logical ?1? is present at the inhibit input terminal all channels are ?OFF?. CD4052 is a differential 4-channel multiplexer having two binary control inputs, A and B, and an inhibit input. The two binary input signals select 1 or 4 pairs of channels to be turned on and connect the differential analog inputs to the differential outputs.
CD4052 IC – (SMD Package) – Differential 4-channel Multiplexer/Demultiplexer IC
The CD4052 analog multiplexers/demultiplexers are digitally controlled analog switches having low ?ON? impedance and very low ?OFF? leakage currents. Control of analog signals up to 15Vp-p can be achieved by digital signal amplitudes of 3?15V. For example, if VDD = 5V, VSS = 0V and VEE = ?5V, analog signals from ?5V to +5V can be controlled by digital inputs of 0?5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD?VSS and VDD?VEE supply voltage ranges, independent of the logic state of the control signals. When a logical ?1? is present at the inhibit input terminal all channels are ?OFF?. A, B, and C, and an inhibit input. The three binary signals select 1 of 8 channels to be turned ?ON? and connect the input to the output. CD4052 is a differential 4-channel multiplexer having two binary control inputs, A and B, and an inhibit input.
CD4053 IC – (SMD Package) – Triple 2-channel Multiplexer/Demultiplexer IC
The CD4053 analog multiplexers/demultiplexers are digitally controlled analog switches having low ?ON? impedance and very low ?OFF? leakage currents. Control of analog signals up to 15Vp-p can be achieved by digital signal amplitudes of 3?15V. For example, if VDD = 5V, VSS = 0V and VEE = ?5V, analog signals from ?5V to +5V can be controlled by digital inputs of 0?5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD?VSS and VDD?VEE supply voltage ranges, independent of the logic state of the control signals. When a logical ?1? is present at the inhibit input terminal all channels are ?OFF?. CD4053B is a triple 2-c .
CD4053 Triple 2-channel Multiplexer/Demultiplexer IC DIP-16 Package
The CD4053 analog multiplexers/demultiplexers are digitally controlled analog switches having low ?ON? impedance and very low ?OFF? leakage currents. Control of analog signals up to 15Vp-p can be achieved by digital signal amplitudes of 3?15V. For example, if VDD = 5V, VSS = 0V and VEE = ?5V, analog signals from ?5V to +5V can be controlled by digital inputs of 0?5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD?VSS and VDD?VEE supply voltage ranges, independent of the logic state of the control signals. When a logical ?1? is present at the inhibit input terminal all channels are ?OFF?. CD4053BC is a triple 2-channel multiplexer having three separate digital control inputs, A, B, and C, and an inhibit input. Each control input selects one of a pair of channels which are connected in a single-pole double-throw configuration.
CD4059 Programmable Divide-by-N Counter IC DIP-24 Package
CD4059 standard "A" Series types are divide-by-N down-counters that can be programmed to divide an input frequency by any number "N" from 3 to 15,999. The output signal is a pulse one clock-cycle wide occurring at a rate equal to the input frequency divided by N. This single output has TTL drive capability. The down-counter is preset by means of 16 jam inputs.
CD4060 14 stage Ripple Carry Binary Counter IC DIP-16 Package
CD4060 consists of an oscillator section and 14 ripple-carry binary counter stages. The oscillator configuration allows design of either RC or crystal oscillator circuits. A RESET input is provided which resets the counter to the all-O's state and disables the oscillator. A high level on the RESET line accomplishes the reset function. All counter stages are master-slave flip-flops. The state of the counter is advanced one step in binary order on the negative transition. All inputs and outputs are fully buffered. Schmitt trigger action on the input-pulse line permits unlimited input-pulse rise and fall times.
Boards & Modules
ARM Microcontroller
AVR Microcontroller Board
Arduino boards
Advance Development Boards
8051 Development Board
Audio Amplifier Module
Current & Volatage Sensor
Breakout Board
Flame Sensors
Force Sensor
Gas Sensors
Hall Effect Sensor
Humidity & Temperature Sensor
LED Module
PIR Sensor
Pressure Sensors
Proximity Sensor
Relay Module
Real Time Clock (RTC) Module
Touch Sensor
Ultrasonic Sensor
Water Level & Water Flow Sensor
Weighing Scale Sensor
Ai Thinker ESp Wifi Module
Pic Devlopment Board & programmer
Led lights & Strips
PCBs & Breadboard
Potentiometer
Power Transistors
Resistor & Smd & inductor
Switches
Aluminium Heat Sink
Buzzer & Speaker
capacitor
Crystal Oscillators
Doides
Electric Fuses
ICs & Dips
Power supply module
Transformer
Relay Module
Kits
Magnet
RF Connectors
PCT and DC Connectors
Wires & Heat Shrink
FFC, FPC, Berg connectors
Nextion
Segment
Seedstudio
Waveshare
E Bike Batteries
E bike Battery Case
E bike Connectors
E bike Display
E bike Kit
E bike Motors & Controllers
Electronics Accessories
Mechanical Accessories
Display
Cameras