Showing 2413–2424 of 2445 results
W04M 1A 400V Full Wave Bridge Rectifier
W10M 1.5A 1000V Full Wave Bridge Rectifier
Waveshare M.2 M KEY To A KEY Adapter for PCIe Devices USB Bluetooth
This is a Waveshare M.2 M KEY To A KEY Adapter, for PCIe Devices, USB Bluetooth. The M. 2 specification identifies 12 key IDs on the module card and socket interface but M. 2 SSDs typically use three common keys:B, M, and B+M. You will find the key type labeled on or near the edge connector (or gold fingers) of the SSD.M.2 modules can integrate multiple functions, including the following device classes: Wi-Fi, Bluetooth, satellite navigation, near field comm, Digital Radio. In this Connector, if you want to connect the m.2 m key to a key. This Types of adapter only Supports with PCI-E channel also In this circuit there is two LED and The LED1 Will Light Up When Device Is Driven Successfully, The LED2 Keeps Off By Default.
Waveshare PCIe TO M.2 Adapter Supports Raspberry Pi Compute Module 4
This is a Waveshare PCIe TO M.2 Adapter, which Supports Raspberry Pi Compute Module 4. An M. 2 SSD will support either SATA orPCIe, but not both at the same time. The PCIe interface is faster, as the SATA 3.0 spec is limited to ~600MB/s maximum speed, while PCIe Gen 2 x2 lanes is capable of up to 1000MB/s, Gen 2 x4 lanes is capable of up to 2000MB/s, and Gen 3 x4 lanes of up to 4000MB/s.Onboard Operating Indicator, The LED Lights Up When Power-On And Keeps Blinking While-Reading/Writing also this connector can copy videos, music, photos, data files between USB devices and the computer at blazing fast speeds.
Waveshare USB HDMI Adapter for CM4-IO-BASE Adapting FFC Connector To Standard Connector
This is a Waveshare USB HDMI Adapter for CM4-IO-BASE, Adapting FFC Connector To Standard Connector. The adapter is used to connect raspberry pi with Display. In this adapter, we have USB 2.0 PORT which helps to give power to the display, and an HDMI connector to give video and audio to the display. On the other side of the adapter, we have an HDMI FFC port and a USB 2.0 FFC port is used to connect Raspberry pi. Specialized USB HDMI adapter for Waveshare CM4-IO-BASE series boards, can be used with CM4 Mini Base Board CM4-IO-BASE-A and CM4-IO-BASE-B.
WDS0603-0.25F 63V 250mA Weite (0603 SMD) Fast Acting Fuse
WDS0603-0.375F 63V 375mA Weite (0603 SMD) Fast Acting Fuse
WDS0603-0.50F 63V 500mA Weite (0603 SMD) Fast Acting Fuse
WDS0603-0.75F 63V 750mA Weite (0603 SMD) Fast Acting Fuse
WDS0603-1.00F 63V 1A Weite (0603 SMD) Fast Acting Fuse
WDS0603-1.50F 63V 1.5A Weite (0603 SMD) Fast Acting Fuse
Boards & Modules
ARM Microcontroller
AVR Microcontroller Board
Arduino boards
Advance Development Boards
8051 Development Board
Audio Amplifier Module
Current & Volatage Sensor
Breakout Board
Flame Sensors
Force Sensor
Gas Sensors
Hall Effect Sensor
Humidity & Temperature Sensor
LED Module
PIR Sensor
Pressure Sensors
Proximity Sensor
Relay Module
Real Time Clock (RTC) Module
Touch Sensor
Ultrasonic Sensor
Water Level & Water Flow Sensor
Weighing Scale Sensor
Ai Thinker ESp Wifi Module
Pic Devlopment Board & programmer
Led lights & Strips
PCBs & Breadboard
Potentiometer
Power Transistors
Resistor & Smd & inductor
Switches
Aluminium Heat Sink
Buzzer & Speaker
capacitor
Crystal Oscillators
Doides
Electric Fuses
ICs & Dips
Power supply module
Transformer
Relay Module
Kits
Magnet
RF Connectors
PCT and DC Connectors
Wires & Heat Shrink
FFC, FPC, Berg connectors
Nextion
Segment
Seedstudio
Waveshare
E Bike Batteries
E bike Battery Case
E bike Connectors
E bike Display
E bike Kit
E bike Motors & Controllers
Electronics Accessories
Mechanical Accessories
Display
Cameras