All Products

PIC16F873A Microcontroller

312.70
The PIC16F873A is a 28/40/44-Pin Enhanced Flash Microcontrollers . The following are the features:-

PIC16F874 Microcontroller – SMD TQFP-44 Package

306.80
The PIC16F874 family of microcontroller is based upon Microchip Mid-Range core with an 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, 3.5 Kbytes program memory, 128 bytes RAM and EEPROM of 64 bytes.

PIC16F877A Microcontroller

Original price was: ₹383.50.Current price is: ₹382.00.
The PIC16F877A is a 28/40/44-Pin Enhanced Flash Microcontrollers . The following are the features:-

PIC16F886 – SMD SO-28 Package – 8 Bit Microcontroller

230.10
This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC? architecture into a 28 pin package.The PIC16F886 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI?) or the 2-wire Inter-Integrated Circuit (I?C?) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.

PICkit3 Debugger Programmer Emulator Controller Development Board

Original price was: ₹3,199.00.Current price is: ₹2,999.00.
PICKIT3.5, begin to support Win7 system. Full patch design, patch through the reflow soldering processing, more stable quality. PIC developing data, C language development tool manual. A lot of PIC basic experiment program code; ICD2 PICKIT3 etc application specification.

Piezo Electric Sensor (Piezo Buzzer Ceramic Plate) – 27mm

Original price was: ₹15.00.Current price is: ₹14.00.
A piezoelectric sensor/element is a device that uses the piezoelectric effect, it is basically a device which converts voltage to vibration and vibration to voltage. It normally comes in handy to measure knock (knock  sensor) or vibration (vibration sensor).
Now a days it is also used extensively in power generation projects e.g. Foot Step Power Generation.

PIR Motion Detector Sensor Module HC-SR501

Original price was: ₹83.00.Current price is: ₹75.00.
The Passive Infrared Sensor (PIR) sensor module is used for motion detection. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a dome shaped Fresnel lens. It is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems.

PIR2 433mhz Human Infrared Sensor for Sonoff RF Bridge

Original price was: ₹1,099.00.Current price is: ₹999.00.
This is a Sonoff PIR2 433mhz Human Infrared Sensor for Sonoff RF Bridge. It is a type of upgraded version inactive mode infrared intrusion detector. It adopts imported super low power consumption digital microprocessor, random dynamic time division and energy deposit logic processing technology lens, dual induction, adjustable pulse counting. This module is consuming low energy and is free to move also detect any motion in real-time. Trigger connected device on or off via smart scene. This Device has home and away modes is set by the factory default.

PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial

Original price was: ₹134.00.Current price is: ₹110.00.
This is PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial. The cable is the easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB to Serial conversion chip and at the end of the 1M cable are four wire red power, black ground, white RX into the USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V levels for interfacing with the most common 3.3V logic level chipsets. Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Also handy for hacking WiFi routers to install alternate OSs, or nearly any other 3.3V logic serial port. This is easier to use than an FTDI cable in many cases because the wires are separated.

Pointed Bit Tip for 25W Soldering Iron (Nickel Plated Needle 3mm Bit)

44.84
This is a Nickel Plated Spade 3mm Pointed Bit, Chisel tip; it can be used with any standard 25 W soldering iron.

Pointed Bit Tip for Micro Soldering Iron

42.48
Generally used for SMD and most through-hole soldering. Low cost and good quality solder iron, with stable heating.

Precision 5V 700mA (3.5W) Isolation Power Supply Module AC-DC Step- Down Module 220V to 5V

Original price was: ₹116.82.Current price is: ₹104.00.
This is a 5V 700mA power supply module . Which can be used to power any DIY projects that can be operated via 5VDC. The module has a power rating of 3.5W.