Water Level & Water Flow Sensor

1/2 inch Water Flow Sensor SEN-HZ21WA

275.00
This sensor is great for water testing, water cooling systems, measure liquid flow, etc.

FS-IR02B Diameter 14MM Water Protection Water Level Sensor Photoelectric Water Level Sensor

335.00
FS-IR02 Water Sensor Module, a corrosion-resistant probe is easily mounted and can handle high temperature and high pressure.

P31 Water Level Sensor Plastic Float Switch

175.00
A float switch is a type of level sensor, a device used to detect the level of liquid within a tank. It is a simple structure, easy to use level control device; moreover, it is neither a complicated circuit nor does it provide power. This switch has a mechanical switch than the average small sized switches

P35 Water Level Sensor Plastic Float Switch

125.00
A float switch is a type of level sensor, a device used to detect the level of liquid within a tank. It is a simple structure, easy to use level control device; moreover, it is neither a complicated circuit nor does it provide power. This switch has a mechanical switch than the average small sized switches.

P45 Water Level Sensor Plastic Float Switch

125.00
A P45 Water Level Sensor Plastic Float Switch is a type of level sensor, a device used to detect the level of liquid within a tank. It is neither a complicated circuit nor does it provide power. It is a simple structure, easy to use level control device; furthermore, this switch has a mechanical switch than those of the average small sized switches.

Rain Drop Sensor Module

Original price was: ₹59.00.Current price is: ₹49.00.
The Raindrops Detection sensor module is used for rain detection. It is also for measuring rainfall intensity. Rain sensor can be used for all kinds of weather monitoring and translated into output signals and AO. Raindrops Detection Sensor Module Rain Weather Module for Arduino, etc. Rain sensor can be used to monitor a variety of weather conditions and turned into several fixed output signal and Analog output. It includes a printed circuit board (control board) that “collects” the raindrops. As raindrops are collected on the circuit board, they create paths of parallel resistance that are measured via the op-amp. The lower the resistance (or the more water), the lower the voltage output. Conversely, the less water, the greater the output voltage on the analog pin. A completely dry board, for example, will cause the module to output 5V. The module includes a rain board and a control board that is separate for more convenience. It has a power indicator LED and an adjustable sensitivity through a potentiometer. The module is based on the LM393 op-amp.

Side Mounted Water Level Float Switch 55mm

129.00
A float switch is a type of level sensor, a device used to detect the level of liquid within a tank. It is neither a complicated circuit nor does it provide power. It is a simple structure, easy to use level control device; furthermore, this switch has a mechanical switch than those of the average small sized switches.

Submersible Mini Water Pump – 3-6V DC

Original price was: ₹60.00.Current price is: ₹50.00.
Micro DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project. This is a low cost, small size Submersible Pump Motor which can be operated from a 3 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.

Turbidity Sensor with Module

545.00
This is a Turbidity Sensor with Module, an electronic monitoring module specially developed to work with microcontroller platforms Arduino, Raspberry Pi, PIC, ARM, AVR, among others.

Water Float Switch Type – 2 (Water Level Sensor)

178.00
A float sensor or a float switch is a sensor used to detect the level of liquid (water) in a tank. Normally the purpose of a float switch is to open or close a circuit as the level of a liquid rises or falls.

Water Level Depth Detection Sensor Module

24.00
This water level sensor module has a series of parallel exposed traces to measure droplets/water volume in order to determine the water level. Very Easy to monitor water level as the output to analog signal is directly proportional to the water level. This output analog values can be directly read via ADC and can also be connected directly Arduino's analog input pins.