The ATMEGA32A is a low power, CMOS 8-bit microcontrollers based on the AVR? enhanced RISC architecture. The ATMEGA32A is a 40/44-pins device with 32 KB Flash, 2 KB SRAM and 1 KB EEPROM. By executing instructions in a single clock cycle, the devices achieve CPU throughput approaching one million instructions per second (MIPS) per megahertz, allowing the system designer to optimize power consumption versus processing speed.
Features:-
? High-performance, Low-power Atmel AVR 8-bit Microcontroller
? Advanced RISC Architecture
– 131 powerful instructions ? most single clock cycle execution
– 32 ? 8 General Purpose Working Registers + Peripheral Control Registers
– Fully Static Operation
– Up to 16MIPS Throughput at 16MHz
– On-chip 2-cycle Multiplier
? High Endurance Non-volatile Memory segments
– 32K bytes of in-system self-programmable flash program memory
– 1024Bytes EEPROM
– 2Kbytes Internal SRAM
– Write/erase cycles: 10,000 flash/100,000 EEPROM
– Data retention: 20 years at 85?C/100 years at 25?C(1)
– Optional Boot Code Section with Independent Lock Bits
? In-System Programming by On-chip Boot Program
? True Read-While-Write Operation
– Programming Lock for Software Security
? JTAG (IEEE std. 1149.1 Compliant) Interface
? Boundary-scan Capabilities According to the JTAG Standard
? Extensive On-chip Debug Support
? Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
? Peripheral Features
? Two 8-bit Timer/Counters with separate prescaler and compare mode
? One 16-bit Timer/Counter with separate prescaler, compare mode, and capture mode
? Real Time Counter with Separate Oscillator
? Four PWM Channels
? 8-channel, 10-bit ADC
? 8 Single-ended Channels
? 7 Differential Channels in TQFP Package Only
? 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x
? Programmable serial USART
? Master/Slave SPI Serial Interface
? Programmable Watchdog Timer with On-chip Oscillator
? On-chip Analog Comparator
? Byte Oriented 2-wire Serial Interface
? Special Microcontroller Features
? Power-on Reset and Programmable Brown-out Detection
? Internal Calibrated RC Oscillator
? External and Internal Interrupt Sources
? Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby ‘
? I/O and Packages
? 32 Programmable I/O Lines
? 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF
? Operating voltage
? 2.7V – 5.5V
? Speed Grades
? 0 – 16MHz
? Power Consumption at 1MHz, 3V, 25?C
? Active: 0.6mA
? Idle Mode: 0.2mA
? Power-down Mode: < 1?A
Specification:-
Parameters |
Values |
Program Memory Type |
Flash |
Program Memory Size (KB) |
32 |
CPU Speed (MIPS/DMIPS) |
16 |
SRAM (B) |
2,048 |
Data EEPROM/HEF (bytes) |
1024 |
Digital Communication Peripherals |
1-UART, 2-SPI, 1-I2C |
Capture/Compare/PWM Peripherals |
1 Input Capture, 1 CCP, 6PWM |
Timers |
2 x 8-bit, 4 x 16-bit |
Number of Comparators |
1 |
Temperature Range (?C) |
-40 to 85 |
Operating Voltage Range (V) |
2.7 to 5.5 |
Pin Count |
44 |
Related Document:-
ATMEGA32A SMD Data Sheet
Reviews
Clear filtersThere are no reviews yet.