DSO138 2.4 inch TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered Original price was: ₹1,900.00.Current price is: ₹1,875.00.
Back to products
RS232 to TTL Serial Interface Module - 4 Pin Original price was: ₹60.00.Current price is: ₹56.00.

Black Aluminum Heat Sink Case with Double Fans for Raspberry Pi 4 Model B

This is a must-have accessory to experience the high performance of the Raspberry Pi 4 Models. The Aluminium Alloy Case with Double Dual Cooling Fan Heat Sink Metal Case is designed especially for Raspberry Pi 4 Model B.

SKU: RW-00240

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

Original price was: ₹849.00.Current price is: ₹775.00.

Inclusive of GST

24 in stock

24 in stock

0 People watching this product now!
  • Pick up from the Robotwala Store

To pick up today

Free

  • Shiprocket from Air

Our courier will deliver to the specified address

3-4 Days

139

  • Shiprocket from Surface

courier will deliver to the specified address

5-7 Days

90

  • Warranty 1 year
  • Free 30-Day returns

Payment Methods:

Description

This is a must-have accessory to experience the high performance of the Raspberry Pi 4 Models. The Aluminium Alloy Case with Double Dual Cooling Fan Heat Sink Metal Case is designed especially for Raspberry Pi 4 Model B.

This is a premium quality heat sink for industrial and continuous use applications for the Raspberry Pi 4. This heat sink enables the Raspberry Pi to function with very high reliability and at higher efficiencies for applications which require the maximum computing power of the Pi 4.

How to Assemble:

Assembly of your heatsink should be quick and easy. First and foremost, make sure your Raspberry Pi 4 is powered off and unplugged.

Next, take a thermal thermal pad, peel off the protective covers and attach to the CPU of your Raspberry Pi. If you would like, you can attach thermal pads to the DDR4 RAM chip, however, it isn’t a necessity.

Finally, you will need to position the top half of the case with the correct orientation, while simultaneously positioning the bottom half underneath your Pi. Grab your hex screws and trusty hex key, secure your new Pi heatsink case in place. If after assembly there is a visible gap between the CPU and the heatsink, disassemble and use an additional thermal pad.

Connect the fan wire as shown below (the orientation of red & black will control which direction the fan blows. They can be reversed).

 

Features:

  1. Type: Raspberry 4B Aluminum Alloy Metal Case
  2. Material: Black Aluminum Alloy Metal
  3. Compatible For Raspberry PI 4
  4. Easy to install, Ultra-thin design.
  5. Open case design with Daul Fans for Fast Heat dissipation.
  6. All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly
  7. Lightweight and durable, Long-lasting stainless
  8. Size: 87mm*56mm*25mm

Package Includes:

1 x Metal Aluminum Case Black

2 x Fan with Connector

1 x Thermal Tape Set

1 x Screw Set

Specifications :-

Compatibility Raspberry Pi 4
Material Aluminum Alloy
Color Black
Length (mm) 88
Width (mm) 56
Height (mm) 24
Weight (gm) 110

* Product Images are shown for illustrative purposes only and may differ from actual product.

Additional information

Operating voltage

2.5 3.0V

Pixel Resolution

0.3MP

Photosensitive array

640 x 480

Optical Size

1.6 inch

Angel of view

67 degrees

Maximum Frame Rate

30fps VGA

Sensitivity

1.3V/(Lux-sec)

Dormancy

Less than 20A

Power consumption

60mW/15fpsVGA YUV

Temperature operation Range

-30 C ~ 70 C

Pixel area

3.6 x 3.6 m

Signal to noise ratio (SNR)

46 dB

Dynamic range

52 dB

Specification

Additional information

Compatibility

Raspberry Pi 4

Material

Aluminum Alloy

Color

Black

Size

87mm*56mm*25mm

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Black Aluminum Heat Sink Case with Double Fans for Raspberry Pi 4 Model B”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5