![](https://robotwala.co.in/wp-content/uploads/2023/07/ethernet-w5100-shield-network-expansion-board-w-micro-sd-card-slot-for-arduino-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ethernet-w5100-shield-network-expansion-board-w-micro-sd-card-slot-for-arduino-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ethernet-w5100-shield-network-expansion-board-w-micro-sd-card-slot-for-arduino-1-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ethernet-w5100-shield-network-expansion-board-w-micro-sd-card-slot-for-arduino-1-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ethernet-w5100-shield-network-expansion-board-w-micro-sd-card-slot-for-arduino-2-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ethernet-w5100-shield-network-expansion-board-w-micro-sd-card-slot-for-arduino-2-400x400-1-150x150.jpg)
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹1,399.00 Original price was: ₹1,399.00.₹1,238.00Current price is: ₹1,238.00.
Inclusive of GST
25 in stock
25 in stock
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board. This Ethernet Shield connects the UNO R3 board to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. allows you to connect your Arduino UNO 328 or MEGA 2650 1280 to a network or the internet AND retrieve or store files on a Micro SD Card!
The Ethernet Shield has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Uno and Mega (using the Ethernet library). The onboard micro SD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4. The original revision of the shield contained a full-size SD card slot; this is not supported.
The shield also includes a reset controller, to ensure that the W5100 Ethernet module is properly reset on power-up. Previous revisions of the shield were not compatible with the Mega and need to be manually reset after power-up.
This module is compatible with following Arduino Uno and Mega
1 x Ethernet W5100 Shield Network Expansion Board with Micro SD Card Slot for Arduino
IC Chip | Wiznet W5100 |
Connection speed | 10/100Mb |
Operating Voltage (VDC) | 5 |
Length (mm) | 75 |
Width (mm) | 54 |
Height (mm) | 25 |
Weight (gm) | 78 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
IC Chip |
Wiznet W5100 |
---|---|
Connection speed |
5 |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.