High Quality Ultra Flexible 24AWG Silicone Wire 10m (Black) Original price was: ₹350.00.Current price is: ₹322.00.
Back to products
16x2 (1602) Character Blue Backlight LCD Display Original price was: ₹135.00.Current price is: ₹114.00.

MCP2515 CAN Bus Module with TJA1050 Transreceiver

This is a easy to use CAN bus module controlled via SPI Interface. It contains CAN Controller MCP2515 and TJA1050 which is a high speed CAN trans-receiver. This module can be esaily interfaced to any microcontroller via SPI Interface. It can also be interfaced to Arduino and Raspberry PI.

SKU: RW-00204

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

Original price was: ₹249.00.Current price is: ₹170.00.

Inclusive of GST

50 in stock

50 in stock

0 People watching this product now!
  • Pick up from the Robotwala Store

To pick up today

Free

  • Shiprocket from Air

Our courier will deliver to the specified address

3-4 Days

139

  • Shiprocket from Surface

courier will deliver to the specified address

5-7 Days

90

  • Warranty 1 year
  • Free 30-Day returns

Payment Methods:

Description

This is a easy to use CAN bus module controlled via SPI Interface. It contains CAN Controller MCP2515 and TJA1050 which is a high speed CAN trans-receiver. This module can be esaily interfaced to any microcontroller via SPI Interface. It can also be interfaced to Arduino and Raspberry PI.
Specifications & Features of MCP2515 CAN Bus Module:-
  • Support CAN V2.0B technical standard, communication rate 1Mb/S.
  • Use High-speed CAN transceiver TJA1050
  • Dimension: 40×28mm
  • SPI control for expand Multi CAN bus interface
  • 8MHZ crystal oscillator
  • 120Ω terminal resistance
  • Module 5V DC power supply.
  • 0 to 8 bytes long data field.
  • Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation
  • The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
  • Use serial port could view the communication data
  • With the independent key, LED indicator, Power indicator
  • With power pin
  • Standard frames, extended frames, and remote frames.
  • Positioning screw hole center spacing 23 mm x 38 mm
Pinout of MCP2515 CAN Bus Module:-
  • VCC :5V power input pin
  • GND : power ground pin
  • CS : SPI SLAVE select pin (Active low)
  • SO : SPI master input slave output lead
  • SI : SPI master output slave input lead
  • SCLK: SPI clock pin
  • INT: MCP2515 interrupt pin

* Product Images are shown for illustrative purposes only and may differ from actual product.

Additional information

Operating voltage

2.5 3.0V

Pixel Resolution

0.3MP

Photosensitive array

640 x 480

Optical Size

1.6 inch

Angel of view

67 degrees

Maximum Frame Rate

30fps VGA

Sensitivity

1.3V/(Lux-sec)

Dormancy

Less than 20A

Power consumption

60mW/15fpsVGA YUV

Temperature operation Range

-30 C ~ 70 C

Pixel area

3.6 x 3.6 m

Signal to noise ratio (SNR)

46 dB

Dynamic range

52 dB

Specification

Additional information

VCC

5V power input pin

GND

power ground pin

CS

SPI SLAVE select pin (Active low)

SO

SPI master input slave output lead

SI

SPI master output slave input lead

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “MCP2515 CAN Bus Module with TJA1050 Transreceiver”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5