![](https://robotwala.co.in/wp-content/uploads/2023/07/NEMA17-4-150x150.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/NEMA17-4-150x150.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/NEMA17-4.8-kg-cm-Stepper-Motor-With-Detachable-72-CM-Cable-ROBU-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/NEMA17-4.8-kg-cm-Stepper-Motor-With-Detachable-72-CM-Cable-ROBU-1-150x150.jpg)
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹719.00 Original price was: ₹719.00.₹705.00Current price is: ₹705.00.
Inclusive of GST
50 in stock
50 in stock
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA17 4.8 kg-cm Stepper Motor can provide 4.8 kg-cm of torque at 2.5A current per phase.
The motors position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The NEMA17 4.8 kg-cm Stepper Motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.
They are very useful in the various application, especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.
It is a brushless DC motor, so the life of this motor is dependent upon life ofthe bearings. The position control is achieved by a simple Open Loop control mechanism so doesn’t require complex electronic control circuitry.
It comes with a detachable 72cm cable which makes wiring and rewiring very fast and easy work. The design of this cable is such that it can directly be mounted on a stepper motor controller.So, playing with the connection is done with just snap of fingers.
The motor D-type shaft has been machined for good grip with a pulley, drive gear etc., and especially avoiding stall or slip.
Note:
1 x NEMA17 4.8 kg-cm Stepper Motor
1 x 4-wired cable with detachable
Motor Type | Single Shaft |
Step Angle | 1.8 degree |
Holding Torque (Kg-Cm) | 4.8 |
Operating Voltage (VDC) | 3.1 |
Supply Current (A) | 2.5 A/Phase |
No. of Leads | 4 |
Inductance (mH/Phase) | 1.8 |
Resistance | 1.25 ohms |
Rotor Inertia (gm-cm2) | 68 |
Weight (gm) | 366 |
Dimensions (mm) LxWxH | 42x42x48 |
Detent Torque (kg-cm) | 0.28 |
Frame Size (mm) | 42 x 42 |
Inductance Accuracy | ±20% |
Resistance Accuracy | ±10% |
Shaft Type | D-type |
Shaft Diameter (mm) | 5-(Round-side); 4.7-(D-side) |
Shaft Length (mm) | 22 |
Step Angle Accuracy | ±5% |
Cable Length (cm) | 72 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
Step Angle |
1.8 degree |
---|---|
Motor Type |
Single Shaft |
Holding Torque (Kg-Cm) |
4.8 |
Operating Voltage (VDC) |
3.1 |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.