This is an OLED display HAT for Raspberry Pi, 2.23 inch diagonal, 12832 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.
You can directly add it on Raspberry Pi by the 40 PIN header, or connect it to another hardware platform via the I2C and SPI interfaces. The interface of 2.23 inch OLED HAT is the default SPI, you can also switch to I2C by soldering the resistors on the back of OLED.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
Original price was: ₹1,600.00.₹1,535.00Current price is: ₹1,535.00.
Inclusive of GST
170 in stock
170 in stock
Pick up from the Robotwala Store
To pick up today
Free
Shiprocket from Air
Our courier will deliver to the specified address
3-4 Days
139
Shiprocket from Surface
courier will deliver to the specified address
5-7 Days
90
Warranty 1 year
Free 30-Day returns
Payment Methods:
This is an OLED display HAT for Raspberry Pi, 2.23 inch diagonal, 12832 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.
You can directly add it on Raspberry Pi by the 40 PIN header, or connect it to another hardware platform via the I2C and SPI interfaces. The interface of 2.23 inch OLED HAT is the default SPI, you can also switch to I2C by soldering the resistors on the back of OLED.
1 x 2.23inch OLED HAT
1 x RPi screws pack (2pieces)
| Driver Chip | SSD1305 |
| Interface | SPI / I2C |
| Resolution | 128×32 |
| Display Size | 2.23inch diagonal |
| Colors | white |
| Visible Angle | >160 |
| Operating Voltage | 3.3V / 5V |
| Logic level | 3.3V |
| Length (mm) | 65 |
| Width (mm) | 30.5 |
| Height (mm) | 3.8 |
| Weight (gm) | 19 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
| Driver Chip |
SSD1305 |
|---|---|
| Interface |
SPI / I2C |
| Resolution |
128×32 |
In stock
In stock
In stock
In stock
Audio Amplifier Module
Current & Volatage Sensor
Breakout Board
Flame Sensors
Force Sensor
Gas Sensors
Hall Effect Sensor
Boards & Modules
Humidity & Temperature Sensor
LED Module
PIR Sensor
Pressure Sensors
Proximity Sensor
Relay Module
Real Time Clock (RTC) Module
Touch Sensor
Ultrasonic Sensor
Water Level & Water Flow Sensor
Weighing Scale Sensor
LED ModulePIR SensorPressure SensorsProximity SensorReal Time Clock (RTC) ModuleTouch SensorUltrasonic SensorWater Level & Water Flow SensorWeighing Scale Sensor
Ai Thinker ESp Wifi ModuleAudio Amplifier ModuleHumidity & Temperature SensorHall Effect SensorGas SensorsFlame SensorsBreakout BoardCurrent & Volatage SensorForce Sensor
No account yet?
Create an Account
8051 Development Board
Advance Development Boards
Arduino boards
ARM Microcontroller
AVR Microcontroller Board
Pic Devlopment Board & programmer
Led lights & Strips
PCBs & Breadboard
Potentiometer
Power Transistors
Resistor & Smd & inductor
Switches
Aluminium Heat Sink
Buzzer & Speaker
capacitor
Crystal Oscillators
Doides
Electric Fuses
ICs & Dips
Power supply module
Transformer
Relay Module
Kits
Magnet
RF Connectors
PCT and DC Connectors
Wires & Heat Shrink
FFC, FPC, Berg connectors
Nextion
Segment
Seedstudio
Waveshare
E Bike Batteries
E bike Battery Case
E bike Connectors
E bike Display
E bike Kit
E bike Motors & Controllers
Electronics Accessories
Mechanical Accessories
Display
Cameras
Reviews
Clear filtersThere are no reviews yet.