Led lights & Strips

12V RGB 5050 SMD LED Strip with 5Meter length has 300 Bright, RGB LEDs on the single strip! The strip is comprised of 5050 Sized SMD RGB LEDs and draws a total of 22.5 Watts of Power. This RGB 5050 SMD LED Strip strip is flexible and can be bent to conform to curves and corners. Runs from 12VDC. (Power supply and controller not included) You need a minimum output 2 AMPs Adapter to power this full 5 Meter strip. Using an underpowered power supply on these strips will result in power loss down the line and mismatched colors due to a certain color of diodes not receiving enough power. These strips are a bit different because, though they have the same number of LED modules (300) in another Cold white or Warm White roll, they actually have three times the light-emitting diodes as a regular LED strips. This is because each of the 300 modules on the strip each contains three colors. A red, a blue, and green LED. This means that, when set to white, at full brightness, the RGB strips use almost three times the power as the regular white strips. A 5 Meter roll of RGB LEDs uses roughly 2.8 Amps at 12VDC. So connecting three of these strips, end-to-end would result in roughly an 8.4 Amp requirement. Note: These are NOT individually addressable LED strips. Each color has its own separate 12VDC circuit. For a total of three 12VDC circuits (R G B). You can power these strips off of regular 12V DC if you don't need advanced flashing patterns or color mixing.

It is a 3mm Blue Clear LED. An LED is a two-lead semiconductor light source, which emits lights when activated. When an appropriate voltage is applied to the LED terminal, then the electrons are able to recombine with the electron holes within the device and release energy in the form of photons. This effect is known as electroluminescence. The color of the LED is determined by the energy bandgap of the semiconductor.

This Blue color LED type with a clear lens is a low power consumption LED with a wide viewing angle, Ideal for backlight and indicator. It is widely used in pin Status, optoelectronics sensors, and fun blinky displays. This is a very basic 8 mm LED with a clear lens. It has a typical forward voltage of 3.4V and a rated forward current of 100mA.

It is a 3mm Green Clear LED. An LED is a two-lead semiconductor light source, which emits lights when activated. When an appropriate voltage is applied to the LED terminal, then the electrons are able to recombine with the electron holes within the device and release energy in the form of photons. This effect is known as electroluminescence. The color of the LED is determined by the energy bandgap of the semiconductor.

A Green light-emitting diode (LED) is a semiconductor light source. LEDs are used as indicator lamps in many devices and are increasingly used for another lighting. It looks like a Green led and it luminate Green light. The series is specially designed for applications requiring higher brightness. The led lamps are available in different colors, intensities.

It is a 5mm Green Clear LED. An LED is a two-lead semiconductor light source, which emits lights when activated. When an appropriate voltage is applied to the LED terminal, then the electrons are able to recombine with the electron holes within the device and release energy in the form of photons. This effect is known as electroluminescence. The color of the LED is determined by the energy bandgap of the semiconductor.