Electronic Components

ATtiny13A Microcontroller – SMD SOP-8 Package – 8-Bit AVR Microcontroller

152.22
Atmel ATTINY13A is AVR TINY series 8 pin SMD microcontroller, packed with high performance, low power 8 bit Advanced RISC Architecture. Its operational Voltage limit is 1.8V to 5.5V. It has 20 MHz CPU Clock, 6 general purpose I/O lines, 1KB ISP flash memory, 64B EEPROM, 60-Byte RAM. It has 1 timer, 2 PWM Channel, 4 Channel ADC inputs and a Watchdog. Operational Temperature range of this microcontroller is -40 to 85 degree C. Internal clock and ISP programming support by SPI protocol. Being small in size and SMD, it is particularly suitable for industrial applications and prototype development. 

ATtiny2313 – SMD SOP-20 Package – 8-Bit AVR Microcontroller

501.50
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 2KB ISP flash memory, 128B ISP EEPROM, 128B internal SRAM, universal serial interface (USI), full duplex UART, and debugWIRE for on-chip debugging. The device supports a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts.

ATtiny2313 Microcontroller

265.50
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 2KB ISP flash memory, 128B ISP EEPROM, 128B internal SRAM, universal serial interface (USI), full duplex UART, and debugWIRE for on-chip debugging. The device supports a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts.

ATtiny45 Microcontroller

224.20
ATtiny45 is a high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 4KB ISP flash memory, 256-Byte EEPROM, 256B SRAM, 6

ATtiny85 Microcontroller

226.56
ATtiny85 is a small 8-pin microcontroller from Atmel and is based on Atmel's 8-bit RISC architecture. ATtiny85 is a high-performance, low-power microcontroller which combines 8KB ISP flash memory, 512B EEPROM, 512-Byte SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit Analog to Digital converter, programmable watchdog timer with internal oscillator, three software selectable power saving modes, and debug WIRE for on-chip debugging. The device achieves a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts.

ATtiny85 Microcontroller – SMD Package – 8 Bit AVR Microcontroller

348.10
ATtiny85 is a small 8-pin microcontroller from Atmel and is based on Atmel's 8-bit RISC architecture. ATtiny85 is a high-performance, low-power microcontroller which combines 8KB ISP flash memory, 512B EEPROM, 512-Byte SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit Analog to Digital converter, programmable watchdog timer with internal oscillator, three software selectable power saving modes, and debug WIRE for on-chip debugging. The device achieves a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts.

AVON Solder Wire – 10gm (Good Quality)

Original price was: ₹30.00.Current price is: ₹28.00.
AVON Solder Wire 10gm is useful if you want to join components and wires, over your PCB. Complete your circuit and join electrically your components through this solder or soldering wire. Solder is a fusible metal alloy used to join together metal workpieces and having a melting point below that of the workpiece(s). Soft solder is typically thought of when solder or soldering is mentioned, with a typical melting range of 90 to 450 °C . It is commonly used in electronics, plumbing, and assembly of sheet metal parts. Manual soldering uses a soldering iron or soldering gun. Alloys that melt between 180 and 190 °C (360 and 370 °F) are the most commonly used. Soldering performed using alloys with a melting point above 450 °C (840 °F) is called brazing.

B Type Aluminium Heat Sink for MK7 MK8 Extruder

105.00
B Type Aluminium Heat Sink for MK7 MK8 Extruder is designed to perfectly fit for 3D printer extruder part. It is especially for the MK7 and MK8 Extruder of 3D Printer.

B36LK6 3A SMC Schottky Diode

11.80
B36LK6 Diode – 3Amp SMC Schottky Diode

BC807 – (SMD SOT-23 Package) – PNP General Purpose Transistor – 5 Pieces Pack

23.60
BC807 PNP general-purpose transistor comes in Surface-Mounted Device (SMD) plastic packages. It is mainly used in General-purpose switching and amplification.

BC817 – (SMD SOT-23 Package) – NPN General Purpose Transistor – 5 Pieces Pack

23.60
BC817 NPN general-purpose transistors comes in Surface-Mounted Device (SMD) plastic packages. It is mainly used in General-purpose switching and amplification.

BC847 – (SMD SOT-23 Package) – NPN General Purpose Transistor – 5 Pieces Pack

17.70
BC847 NPN general-purpose transistors comes in Surface-Mounted Device (SMD) plastic packages. It is mainly used in General-purpose switching and amplification.