Electronic Components

CP2102 (SMD QFN-28 Package) USB to UART Bridge Controller IC

206.50
The CP2102 USB to UART Bridge provides a complete plug and play interface solution that includes royalty-free drivers. This USB 2.0 compliant device includes 0 digital I/O pins and is availble in a 5x5 mm  QFN28 package. 

CS5460A-BS IC – (SMD SSOP-24 Package) – Single Phase Bi-Directional Power/Energy IC

230.10
The CS5460A is a highly integrated power measurement solution which combines two Analog-to-digital Converters (ADCs), high-speed power calculation functions, and a serial interface on a single chip. It is designed to accurately measure and calculate: Real (True) Energy, Instantaneous Power, IRMS, and VRMS for single phase 2- or 3-wire power metering applications. The CS5460A interfaces to a low-cost shunt resistor or transformer to measure current, and to a resistive divider or potential transformer to measure voltage. The CS5460A features a bi-directional serial interface for communication with a microcontroller and a pulse output engine for which the average pulse frequency is proportional to the real power. The CS5460A has on-chip functionality to facilitate AC or DC system-level calibration. The ?Auto-boot? feature allows the CS5460A to function ?stand-alone? and to initialize itself on system power-up. In Auto-boot Mode, the CS5460A reads the calibration data and start-up instructions from an external EEPROM. In this mode, the CS5460A can operate without a microcontroller, in order to lower the total bill-of-materials cost

DAC0800 8-Bit Digital to Analog D/A Converter IC DIP-16 Package

108.56
The DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns. When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible. The DAC0800 series also features high compliance complementary current outputs to allow differential output voltages of 20 Vp-p with simple resistor loads. The reference-to-full-scale current matching of better than ?1 LSB eliminates the need for full-scale trims in most applications, while the non linearities of better than ?0.1% over temperature minimizes system error accumulations.

DAC0808 8-Bit Digital to Analog D/A Converter IC DIP-16 Package

75.52
The DAC0808 is an 8-bit monolithic digital-to-analog converter (DAC) featuring a full scale output current settling time of 150 ns while dissipating only 33 mW with ?5V supplies. No reference current (IREF) trimming is required for most applications since the full scale output current is typically ?1 LSB of 255 IREF/256. Relative accuracies of better than ?0.19% assure 8-bit monotonicity and linearity while zero level output current of less than 4 ?A provides 8-bit zero accuracy for IREF>=2 mA. The power supply currents of the DAC0808 is independent of bit codes, and exhibits essentially constant device characteristics over the entire supply voltage range.

DB107 1 Amp Bridge Rectifier

7.67
The DB107 is a single phase 1.0 Amp Glass Passivated Bridge Rectifier Case: DB-M, Molded plastic.

DB15 Connector Cover

15.34
DB25 plastic case shell cover with screw for two rows DB25 serial Socket/Jack/Connector/port. This product know as DB25 Dust Cover Connector, DB25 Housing, DB25 Cover, DB25 Dust Cap, Plastic Cover For DB25 Connector.

DB15 Female Welded Connector – 15 Pin

57.82
DB15 Female Welded Connector is the most common type of electrical connector. DB 15 connector is part of the D-sub miniature (D-sub) connector plug and socket family for computer and communication devices. DB-15 pins are arranged in rows of two, as one eight-pin row above a seven-pin row.

DB15 Male Welded Connector – 15 Pin

57.82
DB15 Male Welded Connector is the most common type of electrical connector. DB 15 connector is part of the D-sub miniature (D-sub) connector plug and socket family for computer and communication devices. DB-15 pins are arranged in rows of two, as one eight-pin row above a seven-pin row.

DB25 Connector Cover

16.52
DB25 plastic case shell cover with screw for two rows DB25 serial Socket/Jack/Connector/port. This product know as DB25 Dust Cover Connector, DB25 Housing, DB25 Cover, DB25 Dust Cap, Plastic Cover For DB25 Connector.

DB25 Female Right Angle Connector – 25 Pin – PCB Mount

36.58
DB25 25 Pin Right Angle female connector for parallel Port interfaces. Use this on PCBs as an edge mount connector for parallel port devices. Right angle PCB connectors are popular for many I/O applications. Board locks provide a secure PCB connection and easy soldering every time.

DB25 Female Welded Connector – 25 Pin

21.24
DB25 Female Welded Connector is the most common type of electrical connector. DB 25 connector is part of the D-sub miniature (D-sub) connector plug and socket family for computer and communication devices. DB-25 pins are arranged in rows of two, as one thirteen-pin row above a twelve-pin row.

DB25 Male Right Angle Connector – 25 Pin – PCB Mount

36.58
This is a DB25 Male type Right Angle connector for PCB Mounting. It can be easily soldered on PCB. The DB25  connector is an analog 25-pin plug of the D-Subminiature connector family. As with the DB9 connector, the DB25 is mainly used for serial connections, allowing for the asynchronous transmission of data as provided by standard RS-232. It is also used for parallel port connections and was originally used to connect printers, and as a result, is sometimes known as a ?printer port? (LPT for short). So to avoid confusion, DB25 serial ports on computers generally have male connectors, while parallel port connectors are DB25 female plugs.