![](https://robotwala.co.in/wp-content/uploads/2023/07/12v-dc-1-2-electric-solenoid-water-air-valve-switch-normally-closed-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/12v-dc-1-2-electric-solenoid-water-air-valve-switch-normally-closed-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/12v-dc-1-2-electric-solenoid-water-air-valve-switch-normally-closed-1-400x400-1-150x150.png)
![](https://robotwala.co.in/wp-content/uploads/2023/07/12v-dc-1-2-electric-solenoid-water-air-valve-switch-normally-closed-1-400x400-1-150x150.png)
![](https://robotwala.co.in/wp-content/uploads/2023/07/12v-dc-1-2-electric-solenoid-water-air-valve-switch-normally-closed-2-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/12v-dc-1-2-electric-solenoid-water-air-valve-switch-normally-closed-2-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/12v-dc-1-2-electric-solenoid-water-air-valve-switch-normally-closed-3-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/12v-dc-1-2-electric-solenoid-water-air-valve-switch-normally-closed-3-400x400-1-150x150.jpg)
12V DC Solenoid Water Air Valve Switch (Normally Closed) 1/2 controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹310.00 ₹295.00
Inclusive of GST
20 in stock
20 in stock
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
12V DC Solenoid Water Air Valve Switch (Normally Closed) 1/2 controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting Valve in Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value). It is not suitable for use with Gravity fed systems
1 x 12V Solenoid Water Air Valve Switch (Normally Closed) 1/2
Model | 12V DC 1/2″ Solenoid Valve |
Rated Operating Voltage (VDC) | 12 |
Rated Current (mA) | 600 |
Operation Mode | Normally Closed |
Power Consumption (Watt) | 8 |
Pressure | 0.02- 0.8Mpa |
Energized forms | Intermittent |
Inlet and outlet Diameter | Hose barbs for 1/2″ (outer diameter) hose |
Dimensions (mm) LxWxH | Body: 84 x 57mm (L x H) Coil size: 34 x 23mm (W x H) |
Weight (gm) | 100 |
Max fluid temperature | 100C |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
Model |
12V DC 1/2" Solenoid Valve |
---|---|
Model 12V DC 1/2" Solenoid Valve Rated Operating Voltage (VDC) |
12 |
Rated Current (mA) |
600 |
Operation Mode |
Normally Closed |
Power Consumption (Watt) |
8 |
Pressure |
0.02- 0.8Mpa |
Energized forms |
Intermittent |
Inlet and outlet Diameter |
Hose barbs for 1/2" (outer diameter) hose |
Dimensions (mm) LxWxH |
Body: 84 x 57mm (L x H) Coil size: 34 x 23mm (W x H) |
Weight (gm) |
100 |
Max fluid temperature |
100C |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.