![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-2-800x800-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-2-800x800-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-1-800x800-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-1-800x800-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-3-800x800-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-3-800x800-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-2-800x800-2-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-2-800x800-2-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-1-800x800-2-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/08/dip-3-color-led-module-1-800x800-2-150x150.jpg)
This module consists of a 5mm RGB LED and three150 limiting resistorsto prevent burnout. Adjusting the PWM signal on each colour pin will result in different colours.
This isa DIP 3 Color LED Module.Through the PWM adjusting, three primary colours can be mixed to obtain different colours.
Connect the red pin (R) on the KY-016 to pin 11 on the Arduino. Blue (B) to pin 10, green (G) to pin 9 and ground (-) to GND. Notice that you do not need to use limiting resistors since they are already included on the board.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹90.00 ₹88.00
Inclusive of GST
123 in stock
123 in stock
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
This module consists of a 5mm RGB LED and three150 limiting resistorsto prevent burnout. Adjusting the PWM signal on each colour pin will result in different colours.
This isa DIP 3 Color LED Module.Through the PWM adjusting, three primary colours can be mixed to obtain different colours.
Connect the red pin (R) on the KY-016 to pin 11 on the Arduino. Blue (B) to pin 10, green (G) to pin 9 and ground (-) to GND. Notice that you do not need to use limiting resistors since they are already included on the board.
LED module | Arduino |
R | Pin11 |
B | Pin 10 |
G | Pin 9 |
– | GND |
1 x DIP 3 Color LED Module.
Operating Voltage (VDC) | 5 |
LED Type and Size | RGB 5 mm |
LED drive mode | Common Cathode Driver |
PCB Width | 1.5mm |
Length (mm) | 20 |
Width (mm) | 15 |
Height (mm) | 15 |
Weight (gm) | 5 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
Operating Voltage (VDC) |
5 |
---|---|
LED Type and Size |
RGB 5 mm |
LED drive mode |
Common Cathode Driver |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.