Direct V6 J-head Hotend Heatsink for 1.75 mm filament

The Direct V6 J-head Hotend Heatsink for 1.75 mm filament is a filament radiator designed for direct drive 1.75mm extruders andHotend Assemblies and is built to keep filament from melting before it reaches the heat block. This helps to prevent blockages and jams within the cold-endso that it only melts once it is pulled into the heating zone.

The bottom end of the tower has machined thread to connect to the heat break, while the top is surrounded by a shroud to fit a30mm fanand connects to the extruder assembly. The 30mm fan ensures that the filament is maintained at a nice, cool temperature so that it can be extruded with precision accuracy without melting before it needs to. This greatly reduces any chances of filament problems and results in far better quality prints.

Bear in mind that this cooling tower is made for direct drive extruders, so if you are looking for a Bowden-style cooling tower, consider the this V6 Bowden Cooling Towerthat caters universally to both 1.75mm and 3mm extruder assemblies.

This direct V6 J-head Hotend Heatsink for 1.75 mm filament is made to fit 1.75mm diameter direct drive extruder and hotend assemblies like our Charlstruder and Titan Extruder Assembly. It is one of the vital components that keep the filament in ideal condition for quality prints and ensures fewer problems like blockages, jams and leakage.

SKU: RW-01069

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

260.00

Inclusive of GST

0 People watching this product now!
  • Pick up from the Robotwala Store

To pick up today

Free

  • Shiprocket from Air

Our courier will deliver to the specified address

3-4 Days

139

  • Shiprocket from Surface

courier will deliver to the specified address

5-7 Days

90

  • Warranty 1 year
  • Free 30-Day returns

Payment Methods:

Description

The Direct V6 J-head Hotend Heatsink for 1.75 mm filament is a filament radiator designed for direct drive 1.75mm extruders andHotend Assemblies and is built to keep filament from melting before it reaches the heat block. This helps to prevent blockages and jams within the cold-endso that it only melts once it is pulled into the heating zone.

The bottom end of the tower has machined thread to connect to the heat break, while the top is surrounded by a shroud to fit a30mm fanand connects to the extruder assembly. The 30mm fan ensures that the filament is maintained at a nice, cool temperature so that it can be extruded with precision accuracy without melting before it needs to. This greatly reduces any chances of filament problems and results in far better quality prints.

Bear in mind that this cooling tower is made for direct drive extruders, so if you are looking for a Bowden-style cooling tower, consider the this V6 Bowden Cooling Towerthat caters universally to both 1.75mm and 3mm extruder assemblies.

This direct V6 J-head Hotend Heatsink for 1.75 mm filament is made to fit 1.75mm diameter direct drive extruder and hotend assemblies like our Charlstruder and Titan Extruder Assembly. It is one of the vital components that keep the filament in ideal condition for quality prints and ensures fewer problems like blockages, jams and leakage.

Features:

  1. Adaptable to multiple sizes nozzles
  2. Easy to install and Use
  3. High-Temperature Performance

Package Includes:

1 x Direct V6 J-head Hotend Heatsink for 1.75 mm filament

Specifications :-

Material Stainless Steel
Bottom-End Thread M7
Thread Depth 14mm
Feed Path Diameter 2mm
Dimensions (DxH) 25 x 50mm
Weight(gm) 40

* Product Images are shown for illustrative purposes only and may differ from actual product.

Additional information

Operating voltage

2.5 3.0V

Pixel Resolution

0.3MP

Photosensitive array

640 x 480

Optical Size

1.6 inch

Angel of view

67 degrees

Maximum Frame Rate

30fps VGA

Sensitivity

1.3V/(Lux-sec)

Dormancy

Less than 20A

Power consumption

60mW/15fpsVGA YUV

Temperature operation Range

-30 C ~ 70 C

Pixel area

3.6 x 3.6 m

Signal to noise ratio (SNR)

46 dB

Dynamic range

52 dB

Specification

Additional information

Material

Stainless Steel

Bottom-End Thread

M7

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Direct V6 J-head Hotend Heatsink for 1.75 mm filament”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5