![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-5-150x81.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-5-150x81.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-1-150x150.jpeg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-1-150x150.jpeg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-4-150x81.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-4-150x81.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-3-150x150.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-3-150x150.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-2-150x150.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-infrared-receiver-ignition-source-detection-module-1-400x400-2-150x150.webp)
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹75.00 ₹45.00
Inclusive of GST
50 in stock
50 in stock
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm.
Greater the flame, farther the test distance. It has the Detect angle of 60 and very sensitive to flame spectrum.
It produces the one channel output signal at the D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board.
1 x Flame sensor infrared receiver module ignition source detection module
Output Channel | 1 |
Operating Voltage (VDC) | 3.3 ~ 5 |
Mounting Hole(mm) | 3 |
Length (mm) | 32 |
Width (mm) | 14 |
Weight (gm) | 3 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
Output Channel |
1 |
---|---|
Operating Voltage (VDC) |
3.3 ~ 5 |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.