![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-module-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-module-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-module-1-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-module-1-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-module-2-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/flame-sensor-module-2-400x400-1-150x150.jpg)
The Flame Sensor Module can detect flames in the 760-1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum.
An on-board LM393 op-amp is used as a comparator to adjust the sensitivity level. The sensor has a digital and analog output and sensitivity can be adjusted via the blue potentiometer.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹55.00 Original price was: ₹55.00.₹50.00Current price is: ₹50.00.
Inclusive of GST
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
The Flame Sensor Module can detect flames in the 760-1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum.
An on-board LM393 op-amp is used as a comparator to adjust the sensitivity level. The sensor has a digital and analog output and sensitivity can be adjusted via the blue potentiometer.
This Flame Sensor Module is used to detect fire/flame source or other light sources of the wavelength in the range of 760nm 1100 nm. It is based on the YG1006 sensor which is a high speed and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor is sensitive to infrared radiation.
The sensor can be a great addition in a firefighting robot, it can be used as a robot eyes to find the fire source. When the sensor detects flame the Signal LED will light up and the D0 pin goes LOW.
The module has 2 outputs: Analogue, which gives a real-time voltage output signal on thermal resistance, and digital which allows temperature thresholds to be set via a potentiometer.
1 x KY-026 Flame Sensor Module
Operating Voltage (VDC) | 3.3 ~ 5 |
Spectrum range | 760nm ~ 1100nm |
Detection Angle() | 0 to 60 |
Operating Temperature (C) | -25 to 85 |
Length (mm) | 35.5 |
Width (mm) | 15.2 |
Height (mm) | 14 |
Weight (gm) | 3 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
Operating Voltage (VDC) |
3.3 ~ 5 |
---|---|
Spectrum range |
760nm ~ 1100nm |
Detection Angle() |
0 to 60 |
Operating Temperature (C) |
-25 to 85 |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.