MP3-TF-16P MP3 SD Card Module with Serial Port Original price was: ₹110.00.Current price is: ₹105.00.
Back to products
MAX6675 Module with K Type Thermocouple Sensor Original price was: ₹289.00.Current price is: ₹250.00.

NODEMCU – ESP8266 Wifi Development Board based on CP2102 IC

The NodeMCU with cp2102 Wifi Board is an all-in-one microcontroller + WiFi platform that is very easy to use to create projects with WiFi and IoT (Internet of Things) applications. The board is based on the highly popular ESP8266 WiFi Module chip with the ESP-12 SMD footprint. This WiFi development board already embeds in its board all the necessary components for the ESP8266 (ESP-12E) to program and uploade code. It has a built-in USB to serial chip upload codes, 3.3V regulator and logic level converter circuit so you can immediately upload codes and connect your circuits. This board contains the ESP-12E chip with a 4MB! flash memory so no worries for your long project codes!

SKU: RW-00079

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

Original price was: ₹349.00.Current price is: ₹320.00.

Inclusive of GST

100 in stock

100 in stock

0 People watching this product now!
  • Pick up from the Robotwala Store

To pick up today

Free

  • Shiprocket from Air

Our courier will deliver to the specified address

3-4 Days

139

  • Shiprocket from Surface

courier will deliver to the specified address

5-7 Days

90

  • Warranty 1 year
  • Free 30-Day returns

Payment Methods:

Description

The NodeMCU with cp2102 Wifi Board is an all-in-one microcontroller + WiFi platform that is very easy to use to create projects with WiFi and IoT (Internet of Things) applications. The board is based on the highly popular ESP8266 WiFi Module chip with the ESP-12 SMD footprint. This WiFi development board already embeds in its board all the necessary components for the ESP8266 (ESP-12E) to program and uploade code. It has a built-in USB to serial chip upload codes, 3.3V regulator and logic level converter circuit so you can immediately upload codes and connect your circuits. This board contains the ESP-12E chip with a 4MB! flash memory so no worries for your long project codes!

The ESP8266 NodeMCU with cp2102 development board – a true plug-and-play solution for inexpensive projects using WiFi. The module arrives pre-flashed with NodeMCU firmware so just install your USB driver. The NodeMCU is an open-source project and you can find all the design files and so on from their github page.This microcontroller board can easily be programmed using the Arduino IDE programming software.

Specifications and Features of Node MCU:-

 

  • 11 b/g/n Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • CP2102 Serial / USB Chip
  • +19.5dBm output power in 802.11b mode
  • 4MB Flash Memory
  • Integrated low power 32-bit CPU
  • SDIO 1.1 / 2.0, SPI, UART
  • Dimensions – 49 x 24.5 x 13mm
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLLs, regulators, DCXO and power management units
  • On board USB to serial chip to easily program and upload codes from the Arduino IDE
  • Embeds logic level converter circuits
  • Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
  • Easy access to the GPIO pins for easy prototyping
  • ESP-12E Processor
  • Easy to use breadboard friendly form factor
  • Voltage Regulator / Converter, excellent DC to DC conversion, super efficient

 

* Product Images are shown for illustrative purposes only and may differ from actual product.

Additional information

Operating voltage

2.5 3.0V

Pixel Resolution

0.3MP

Photosensitive array

640 x 480

Optical Size

1.6 inch

Angel of view

67 degrees

Maximum Frame Rate

30fps VGA

Sensitivity

1.3V/(Lux-sec)

Dormancy

Less than 20A

Power consumption

60mW/15fpsVGA YUV

Temperature operation Range

-30 C ~ 70 C

Pixel area

3.6 x 3.6 m

Signal to noise ratio (SNR)

46 dB

Dynamic range

52 dB

Specification

Additional information

Wi-Fi Direct (P2P)

11 b/g/n

Serial

CP2102

Integrated low power

32-bit CPU

Flash Memory

4MB

Processor

ESP-12E

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “NODEMCU – ESP8266 Wifi Development Board based on CP2102 IC”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5