![](https://robotwala.co.in/wp-content/uploads/2023/10/RW-01236-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/RW-01236-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/RW-01236-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/RW-01236-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/RW-01236-2-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/RW-01236-2-150x150.jpg)
This sensor is based on amplifier LM2904 and a built-in microphone. Signal conditioning and gain control are important and are incorporated into this Grove Loudness sensor. Using an electret mic and two-stage high-pass filter using an LM2904 OP-AMP, it creates a nice, detectable envelope signal for your Grove project.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹758.00 ₹753.00
Inclusive of GST
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
How loud is too loud? Want to detect? But, detecting sound isnt as simple as a mic into an input, thats why we are presenting the Seeed Studios Grove Loudness Sensor for it! With this sensor, you will be able to detect the environmental sound and measure its loudness in terms of intensity.
This sensor is based on amplifier LM2904 and a built-in microphone. Signal conditioning and gain control are important and are incorporated into this Grove Loudness sensor. Using an electret mic and two-stage high-pass filter using an LM2904 OP-AMP, it creates a nice, detectable envelope signal for your Grove project.
This sensor receives the high-frequency signal from the microphone, then amplifies it to a certain extent and then, filters it. And finally, it provides a positive envelope at the output. This will make for Arduinos signal acquisition. The output value depends on the level of sound input. In order to avoid unnecessary signal disturbances, the input signal will go through two times filtering inside the module. This sensor comes with a built-in screw potentiometer that enables manual adjustments to the output gain.
1 x Grove Loudness Sensor Module
Operating Voltage (VDC) | 3.5 ~ 10 |
Frequency Range | 50 Hz 2000 Hz |
Sensitivity (dBm) | -48 to 66 |
S/N Ratio (dB) | > 58 |
Length (mm) | 24 |
Width (mm) | 20 |
Height (mm) | 10 |
Mounting hole diameter (mm) | 2 |
Weight (gm) | 4 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.