This sensor is very useful for the GoPiGo & GrovePi System; moreover, it allows your GrovePi or GoPiGo robot car to listen to sound strength, so you can control it to take a picture or move around based on changes in noise!
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹495.00
Inclusive of GST
Pick up from the Robotwala Store
To pick up today
Free
Shiprocket from Air
Our courier will deliver to the specified address
3-4 Days
139
Shiprocket from Surface
courier will deliver to the specified address
5-7 Days
90
Warranty 1 year
Free 30-Day returns
Payment Methods:
Need a sound sensing device with high sensitivity? We have the Grove Sound Sensor especially for you. It detects the sound intensity of the environment. It is a simple microphone based on the LM386 amplifier and an electret microphone. The output of this module is analog so that you can easily sample and test it by a Seeeduino or an Arduino. The sensor also comes with a potentiometer, so you can adjust the value of output by varying it.
This sensor is very useful for the GoPiGo & GrovePi System; moreover, it allows your GrovePi or GoPiGo robot car to listen to sound strength, so you can control it to take a picture or move around based on changes in noise!
For all Grove users (especially beginners), Seeed Studio provides guidance PDF documents. Please download and read through Preface Getting Started and Introduction to Grove before using the product. This is a suitable product for not only Grove users but also all electronic enthusiasts. So, why wait? Buy now!
1 x Grove Sound Sensor Module
| Operating Voltage (VDC) | 3.3 ~ 5 |
| Wide Supply Voltage Range | 4 V to 12 V |
| Max. Operating Current (mA) | 5 |
| Low Quiscent Current Drain | 4 mA |
| Voltage Gain (dB) | 26 at V=6 V, f=1 kHz |
| Microphone Sensitivity | 52 to 48 dB at f=1kHz |
| Microphone Impedance | 2.2 k? |
| Microphone Frequency | 16 to 20 kHz |
| Microphone S/N Ratio | 54 dB |
| Length (mm) | 24 |
| Width (mm) | 20 |
| Height (mm) | 10 |
| Mounting hole diameter (mm) | 2 |
| Weight (gm) | 4 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
In stock
In stock
Audio Amplifier Module
Current & Volatage Sensor
Breakout Board
Flame Sensors
Force Sensor
Gas Sensors
Hall Effect Sensor
Boards & Modules
Humidity & Temperature Sensor
LED Module
PIR Sensor
Pressure Sensors
Proximity Sensor
Relay Module
Real Time Clock (RTC) Module
Touch Sensor
Ultrasonic Sensor
Water Level & Water Flow Sensor
Weighing Scale Sensor
LED ModulePIR SensorPressure SensorsProximity SensorReal Time Clock (RTC) ModuleTouch SensorUltrasonic SensorWater Level & Water Flow SensorWeighing Scale Sensor
Ai Thinker ESp Wifi ModuleAudio Amplifier ModuleHumidity & Temperature SensorHall Effect SensorGas SensorsFlame SensorsBreakout BoardCurrent & Volatage SensorForce Sensor
No account yet?
Create an Account
8051 Development Board
Advance Development Boards
Arduino boards
ARM Microcontroller
AVR Microcontroller Board
Pic Devlopment Board & programmer
Led lights & Strips
PCBs & Breadboard
Potentiometer
Power Transistors
Resistor & Smd & inductor
Switches
Aluminium Heat Sink
Buzzer & Speaker
capacitor
Crystal Oscillators
Doides
Electric Fuses
ICs & Dips
Power supply module
Transformer
Relay Module
Kits
Magnet
RF Connectors
PCT and DC Connectors
Wires & Heat Shrink
FFC, FPC, Berg connectors
Nextion
Segment
Seedstudio
Waveshare
E Bike Batteries
E bike Battery Case
E bike Connectors
E bike Display
E bike Kit
E bike Motors & Controllers
Electronics Accessories
Mechanical Accessories
Display
Cameras
Reviews
Clear filtersThere are no reviews yet.