![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-3-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-3-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-1-768x576-1-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-1-768x576-1-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-2-768x576-1-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-2-768x576-1-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-5-768x576-1-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-5-768x576-1-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-4-150x113.webp)
![](https://robotwala.co.in/wp-content/uploads/2023/08/Grove-Temperature-Humidity-Pressure-and-Gas-Sensor-4-150x113.webp)
The Grove-Temperature, Humidity Pressure & Gas Sensor (BME680) is not just a simple Arduino temperature sensor or barometer sensor but is a multiple function sensor that can measure temperature, pressure, humidity, and gas at the same time. Based on the BME680 module, it can provide you with rich environmental parameters at low power consumption and a wide measurement range. It integrates the 4-in-1 function on such a small module and will be very beneficial to apply on GPS devices or IoT projects such as your own Arduino weather station or weather forecast system.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹2,999.00 ₹2,687.00
Inclusive of GST
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
The Grove-Temperature, Humidity Pressure & Gas Sensor (BME680) is not just a simple Arduino temperature sensor or barometer sensor but is a multiple function sensor that can measure temperature, pressure, humidity, and gas at the same time. Based on the BME680 module, it can provide you with rich environmental parameters at low power consumption and a wide measurement range. It integrates the 4-in-1 function on such a small module and will be very beneficial to apply on GPS devices or IoT projects such as your own Arduino weather station or weather forecast system.
Pin Diagram
1 x Grove – Temperature, Humidity, Pressure, and Gas Sensor (BME680)
1 x Grove cable
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
Operating Voltage |
3.3V/5V |
---|---|
Operating Range |
-40~+85?; 0-100% r.H.; 300-1100hPa |
Humidity Absolute Accuracy |
? 3%r.H. (20-80 %r.H.,25?) |
Humidity Resolution |
0.008 %r.H. |
Pressure Absolute Accuracy |
? 0.6 hPa (300-1100 hPa, 0-65?) |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.