![](https://robotwala.co.in/wp-content/uploads/2023/10/SeeedStudio-Grove-Water-Sensor-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/SeeedStudio-Grove-Water-Sensor-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/SeeedStudio-Grove-Water-Sensor-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/SeeedStudio-Grove-Water-Sensor-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/SeeedStudio-Grove-Water-Sensor-2-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/10/SeeedStudio-Grove-Water-Sensor-2-150x150.jpg)
Grove Water Sensor v1.1. This sensor is made up of interlaced traces of ground and sensor signals. It indicates whether the sensor is dry, damp or completely immersed in water by measuring conductivity; furthermore, it detects the presence of water using its exposed PCB traces.
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹445.00 ₹442.00
Inclusive of GST
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
Do you want a device to detect level of water and to indicate that level? So for you, we are presenting the Grove Water Sensor v1.1. This sensor is made up of interlaced traces of ground and sensor signals. It indicates whether the sensor is dry, damp or completely immersed in water by measuring conductivity; furthermore, it detects the presence of water using its exposed PCB traces.
The traces of this sensor have a weak pull-up resistor of 1 M. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. This circuit will work with digital I/O pins of Arduino or you can use it with the analog pins to detect the amount of water induced on contact between the grounded and sensor traces. You can use this sensor as a rainfall detecting device, liquid leakage detector, or tank overflow detector.
For all Grove users (especially beginners), Seeed Studio provides guidance PDF documents. Please download and read through Preface Getting Started and Introduction to Grove before using the product. This is a suitable product for not only Grove users but also all electronic enthusiasts. So, why wait? Buy now!
1 xGrove Water Sensor v1.1
Operating Voltage (VDC) | 4.75 ~ 5.25 |
Working Temperature Range (C) | 10 to 30 |
Working Humidity Range | 10% to 90% without condensation |
Length (mm) | 40 |
Width (mm) | 20 |
Height (mm) | 12 |
Mounting hole diameter (mm) | 2 |
Weight (gm) | 4 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.