![](https://robotwala.co.in/wp-content/uploads/2023/07/tb6612fng-dual-motor-driver-module-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/tb6612fng-dual-motor-driver-module-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/tb6612fng-dual-motor-driver-module-2-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/tb6612fng-dual-motor-driver-module-2-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/tb6612fng-dual-motor-driver-module-1-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/tb6612fng-dual-motor-driver-module-1-400x400-1-150x150.jpg)
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹489.00 ₹399.00
Inclusive of GST
10 in stock
10 in stock
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1 pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
Driver Model | TB6612FNG |
Operating Voltage(VDC) | 15 |
Peak Current (A) | 3.2 |
Continuous Current (A) | 1.2 |
No. of Channels | 1 |
LED Indicator | Yes |
Cooling Fan | NO |
Arduino Sheild | No- can be used with Wire connection |
Polarity Protection | NO |
Dimensions in mm (LxWxH) | 30 x 20 x 10 |
Weight (gm) | 22 |
Package Includes :
1 x Dual Motor Driver Module 1A TB6612FNG For Arduino
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
Operating Voltage(VDC) |
15 |
---|---|
Peak Current (A) |
3.2 |
Continuous Current (A) |
1.2 |
No. of Channels |
1 |
LED Indicator |
Yes |
Cooling Fan |
No |
Arduino Sheild |
No- can be used with Wire connection |
Polarity Protection |
NO |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.