![](https://robotwala.co.in/wp-content/uploads/2023/07/ttl-ftdi-transmitter-usb-for-33v-5v-dual-power-ft232rl-mwc-programmer-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ttl-ftdi-transmitter-usb-for-33v-5v-dual-power-ft232rl-mwc-programmer-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ttl-ftdi-transmitter-usb-for-33v-5v-dual-power-ft232rl-mwc-programmer-3-800x800-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ttl-ftdi-transmitter-usb-for-33v-5v-dual-power-ft232rl-mwc-programmer-3-800x800-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ttl-ftdi-transmitter-usb-for-33v-5v-dual-power-ft232rl-mwc-programmer-2-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ttl-ftdi-transmitter-usb-for-33v-5v-dual-power-ft232rl-mwc-programmer-2-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ttl-ftdi-transmitter-usb-for-33v-5v-dual-power-ft232rl-mwc-programmer-1-400x400-1-150x150.jpg)
![](https://robotwala.co.in/wp-content/uploads/2023/07/ttl-ftdi-transmitter-usb-for-33v-5v-dual-power-ft232rl-mwc-programmer-1-400x400-1-150x150.jpg)
Hurry and get discounts on all Apple devices up to 20%
Sale_coupon_15
₹269.00 ₹220.00
Inclusive of GST
25 in stock
25 in stock
To pick up today
Free
Our courier will deliver to the specified address
3-4 Days
139
courier will deliver to the specified address
5-7 Days
90
Payment Methods:
By using the TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multi view 2.5 is the same as the GPS in the APM pack and any other.
A device that has a TTL port provides the computer with a USB port. By connecting this converter to the computer and installing the driver program, which addsa virtual serial port to the computer ports, which is capable of working with Windows operating systems, MAC, Linux. On the output of this converter, in addition to the TXD, RXD and GND pins, the output voltage is also 5v and 3.3v.
AUSB/TTL converter based on FT232RL high quality, high-performance USB-to-Serial Bridge Controller. The famous manufacturer of USB/TTL converter products produced this chip. The FTDI TTL USB is the latest device to be added to FTDIs range of USB UART interface Integrated Circuit Devices.
This TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RL FTDI MWC Programmer board decrease the cost of Arduino development and increases ease of use. The jumper on the back of the board allows the boards power output and IO level to be configured to either 3.3V or 5V. You can cut the default 5V trace and add a solder jumper to switch to 3.3V.
1 x TTL FTDI Transmitter USB For 3.3V 5V dual power module.
IC Chip | FT232RL |
Connector Type | Mini USB |
Length (mm) | 25 |
Width (mm) | 16 |
Height (mm) | 6 |
Weight (gm) | 4 |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Operating voltage | 2.5 3.0V |
Pixel Resolution | 0.3MP |
Photosensitive array | 640 x 480 |
Optical Size | 1.6 inch |
Angel of view | 67 degrees |
Maximum Frame Rate | 30fps VGA |
Sensitivity | 1.3V/(Lux-sec) |
Dormancy | Less than 20A |
Power consumption | 60mW/15fpsVGA YUV |
Temperature operation Range | -30 C ~ 70 C |
Pixel area | 3.6 x 3.6 m |
Signal to noise ratio (SNR) | 46 dB |
Dynamic range | 52 dB |
IC Chip |
FT232RL |
---|---|
Connector Type |
Mini USB |
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.