White 4S 100A LiFePO4 Lithium Battery Protection Balance Charging BMS Protection PCB Board

This protection board is 4s in common use lithium battery protection board (you can adjust for how many strings to be used) Specified chip, stable performance, support disconnection protection, over-current protection, over-discharge protection, overcharge protection, with balance, etc. A common use for same port and different port, the protection board uses 15 high-power of ultra-low resistance MOS tubes (discharge of 8, charging 7), in the same port mode can support the discharge current 60A, charging current 60A; different port mode discharges current 80A, charging current 60A. Can use for LMO. Ternary lithium battery. LCO(3.7V)battery packs etc.

SKU: RW-00497

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

479.00

Inclusive of GST

50 in stock

50 in stock

0 People watching this product now!
  • Pick up from the Robotwala Store

To pick up today

Free

  • Shiprocket from Air

Our courier will deliver to the specified address

3-4 Days

139

  • Shiprocket from Surface

courier will deliver to the specified address

5-7 Days

90

  • Warranty 1 year
  • Free 30-Day returns

Payment Methods:

Description

This protection board is 4s in common use lithium battery protection board (you can adjust for how many strings to be used) Specified chip, stable performance, support disconnection protection, over-current protection, over-discharge protection, overcharge protection, with balance, etc. A common use for same port and different port, the protection board uses 15 high-power of ultra-low resistance MOS tubes (discharge of 8, charging 7), in the same port mode can support the discharge current 60A, charging current 60A; different port mode discharges current 80A, charging current 60A. Can use for LMO. Ternary lithium battery. LCO(3.7V)battery packs etc.

Specification:

  1. Single cell battery overcharge protect voltage : 3.61-3.69 V
  2. Single cell battery overcharge protect recover voltage : 3.5-3.6V
  3. Overcharge protect delay : 1.5-2.5S
  4. Single cell battery over-discharge protect voltage : 2.27-2.43 V
  5. Single cell battery over-discharge protect recover voltage : 2.45-2.65 V
  6. Overcharge protect Current : 100A
  7. Over-discharge protect Current : 100A
  8. Over-discharge protect delay : 0.5-1.5S
  9. Temperature protect : Yes, have Temperature control interface.
  10. Disconnect protect : Yes
  11. Shortage protect : Yes
  12. Shortage delay : 100-600 uS
  13. Shortage protect recover mode: Off load release.
  14. Contact discharge current:80A
  15. Synopline discharge current:60A
  16. Charging current:60A
  17. Balance function: yes
  18. Ampere balance (Current) : 50MA
  19. Voltage balance accuracy : 3.355-3.455 V

Package Includes:

1 x White 4S 100A LiFePO4 Lithium Battery Protection PCB Board.

* Product Images are shown for illustrative purposes only and may differ from actual product.

Additional information

Operating voltage

2.5 3.0V

Pixel Resolution

0.3MP

Photosensitive array

640 x 480

Optical Size

1.6 inch

Angel of view

67 degrees

Maximum Frame Rate

30fps VGA

Sensitivity

1.3V/(Lux-sec)

Dormancy

Less than 20A

Power consumption

60mW/15fpsVGA YUV

Temperature operation Range

-30 C ~ 70 C

Pixel area

3.6 x 3.6 m

Signal to noise ratio (SNR)

46 dB

Dynamic range

52 dB

Specification

Additional information

Single cell battery overcharge protect voltage

3.61-3.69 V

Single cell battery overcharge protect recover voltage

3.5-3.6V

Overcharge protect delay

1.5-2.5S

Single cell battery over-discharge protect voltage

2.27-2.43 V

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “White 4S 100A LiFePO4 Lithium Battery Protection Balance Charging BMS Protection PCB Board”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5